Lovato 49060463, Инструкция по сборке и обслуживанию

Страница: 27 / 58

27
Assembling instrunctions and maintenance
Menu description Description Settings range Default T-FAST ie40 User settings
6.8 Signal V2
6.8.1.1 Circulation ON/OFF on
6.8.1.2 Circulation
Request / periods /
periods / contin.
operation
Orari
6.9 Pressure monitor ON / OFF OFF
6.9.2 RPS type
Off / 0÷0,6 bar / 0÷1 bar /
0÷1,6 bar / 0÷2,5 bar / 0÷4
bar / 0÷6 bar / 0÷10 bar
6.14 Daylight saving Si / No Si
6.15 Eco disply mode ON / OFF ON
7. MENU LOCK
7.1 Menu lock ON / OFF OFF
7.2 Expert mode Simple / Expert Expert
CIRCULATION PARAMETERS SETTINGS
- Check PWM cables connection of circulation pump (2 wires cable) brown (terminal V2 ) / blue -- terminal ( - )
- Check power cables connection of circulation pump (3 wires cable)
brown terminal L , blue terminal N , yellow/green terminal GROUND
Press ESC and pay attention to the menu number on the left side of the screen
- Enter to menu 6.6 “Relay 2”, then menu 6.6.5 “parallel function V2” select ON,
menu 6.6.5.2 then set 15 s,
menu 6.6.5.3 then set 15 s.
- Enter to menu 6.8 “Signal V2”, select ON in the menu 6.8.1.1
Nel menu 6.8.1.2 select the operation mode of the circulation
- Menu 6.1 “V1 pump”
- Menu 6.1.1 select PWM
- Menu 6.1.2 select HEATING
- Enter menu 6.2 “V1 pump speed”
- Menu 6.2.1 then set 100%
- Menu 6.2.2 then set 30%
- Enter in the menu 6.3 “V1 pump”
- Menu 6.3.1 select PWM
- Menu 6.3.2 select SOLAR
- Enter in the menu 6.4 “Pump speed V2”
- Menu 6.4.1 then set 100%
- Menu 6.4.2 then set 30%
- Menu 6.3.4 “PWM off” set 2% then press ok to save change
- Menu 6.3.5 “PWM on” set 13% then press ok to save change
- Menu 6.3.6 “PWM MAX” set 93% then press ok to save change
- Menu 4.1 set DHW temperature
- In the menu 4.2 set max.temperature 60°C
- In the menu 4.3 VFS type 2-40 l/min
- In the menu 4.4 and submenus is possible to set circulation pump characteristics.
However we suggest that you set the values as shown in the table of this manual.