Loup Electronics Elite YIELD MONITOR Скачать руководство пользователя страница 2

LOUP ELITE YIELD MONITOR  •  OPERATION MANUAL

2

Service and Technical SupporT

Contact:  Loup Electronics Inc. 

Address:  3030 N. 40TH St. 

 

Lincoln, NE  68504

Phone:  

877-489-LOUP(5687) 

 402-464-7131

Fax:  

402-464-7104

E-mail: [email protected]

TaBle oF conTenTS

AfTER HOuRs/WEEkEND suppORT: 

 

402-318-6415  

or  

402-853-6249

1.0 sYsTEM OvERvIEW   . . . . . . . . . . . . . . . . .3

1.1 INITIAL fIRsT-TIME sETup  . . . . . . . . . . . .3
1.2 OpERATION CHECkLIsT  . . . . . . . . . . . . . .3
2.0 MAIN sCREEN fuNCTIONs . . . . . . . . . . . .4

2.1 Live Yield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.2 Header Width Reduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.3 Live Test Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.4 Reset Load/ADD LOAD  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.5 Custom Displays 1 and 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.5.1 Resetting Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.6 Field Area  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.7 Field Average   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.8 Live Moisture/Ave. Moisture   . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.9 Combine/Speed  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.10 Farm/Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.11 Crop/Variety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.12 Tasks and Task Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.0 TAsks & LOggINg   . . . . . . . . . . . . . . . . . .5

3.1 Entering a Task Name  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.2 Farm & Field Names  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.3 Crop & Variety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.4 Starting a Task   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.5 Stopping a Task . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.6 Load a Previous Task  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.7 Climate Fieldview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4.0 YIELD NuDgE/CAL  . . . . . . . . . . . . . . . . . .6

4.2 LOAD Nudge (Load MANAGEMENT ON)  . . . . . . . . . . . . 7

5.0 CROp DETAILs   . . . . . . . . . . . . . . . . . . . . .8

5.1 Cal number    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.2 Standard Density  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.3 Header Width  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.4  Sections 8

5.5 Auto Width Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.6 Set the Cutout Height   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.7 % Moisture Correction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.8 Standard Moisture  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.9 Gain & Offsets   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.10 High & Low Moisture Limits  . . . . . . . . . . . . . . . . . . . . . . . . 8

5.11 Moisture On/Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.0 COMbINE sETup. . . . . . . . . . . . . . . . . . . .9

6.1 Make    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.2 Model     . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.3 Header Switch/Sensor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.3.1 HEADER PULL Switch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.3.2 VARIABLE HEIGHT Sensor . . . . . . . . . . . . . . . . . . . . . . . . 9

6.4 Speed Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.4.1 GPS Receiver  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.4.2 Shaft Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6.4.3 Wheel Pulses Per 400ft   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6.4.4 Speed Calibration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6.5 Grain Loss  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7.0 gps sETTINgs   . . . . . . . . . . . . . . . . . . . . .10

7.1 GPS Baudrate  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7.2 GPS Offsets  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7.3 GPS Speed Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

7.4 GPS Status  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

8.0 YIELD sENsOR sETTINgs   . . . . . . . . . . . .10

8.1 Set Tare 10

8.2 Yield Smoothing   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8.3 Yield Delay   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8.4 Load Management  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

9.0 ADvANCED YIELD sETTINgs  . . . . . . . . . .11

9.1 Line Points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

9.2 Auto Cal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

9.2.1 Auto Cal Procedure   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

10.0 ANgLE sENsOR sETTINgs . . . . . . . . . . .12
11.0 DIAgNOsTICs  . . . . . . . . . . . . . . . . . . . . .12
12.0 DIspLAY sETTINgs . . . . . . . . . . . . . . . . .12

12.1 Brightness  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

12.2 Volume   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

12.3 Units  12

12.4 Date & Time  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

13.0 sYsTEM upDATE   . . . . . . . . . . . . . . . . . .13

13.1 Update App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

13.2 Unlock Drill App  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

13.3 Switch to Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

13.4 Factory Reset   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Содержание Elite YIELD MONITOR















Отзывы: