68
remain enabled and the tell tale will
remain illuminated.
Resuming cruise control
Press the button. The vehicle speed will
automatically accelerate or decelerate to
the last activated set speed.
WARNING
The resume function should be used only
if you want to return to and are aware of
the set speed.
Set speed cancellation
The set speed will be reset to zero when
you disable cruise control (from the enabled
state) or if the ignition is switched off.
To turn off cruise control
Press the button once from the enabled
state or twice from the active state and the
cruise control tell tale will extinguish.
Cruise Control (If Fitted)
WARNING
Use cruise control only when conditions
are favourable; on straight, dry, open
roads with light traffic
.
Note: The system cannot be activated below
28 mph (45 km/h) or above 130 mph (210
km/h), or in first or second gear.
Cruise control modes are:
- Off.
- Enabled (but inactive).
- Active.
To enable cruise control
With the ignition on or engine running
press the
button; the tell tale in the
instrument panel will light to confirm that
the system is enabled (although no speed
has yet been set).
Alternatively, this operation may be com-
bined with that for activation, by pressing
the
button followed by the button.
To activate cruise control:
With the system enabled drive the car to the
desired speed and press the button. The
accelerator may now be released and the
set speed maintained (road gradient and
winds permitting). The accelerator may be
used to increase speed temporarily without
affecting the setting.
Changing the cruise setting
Whilst cruise is active, the speed setting
can be adjusted by:
- Holding down the or buttons to ac-
celerate/decelerate the car to the desired
new speed. On release of the button, that
speed is set.
- Repeated short presses of the or
buttons to increase or decrease the set-
ting by increments of 0.6 mph (1 km/h).
Returning to enabled (but inactive) mode
This will occur with any of the following
actions:
- The brake or clutch pedal is depressed;
- The button is pressed.
In any of these cases, normal manual speed
control will be restored, but the system will
AUTOMATIC TRANSMISSION
L
T
O
U S
CRUISE CONTROL SWITCHES
+
+
+
_
+
_
E132T0324JA Federal Evora 400 From SOP OHB English Language.indd 68
15/08/2018 14:47:22
Содержание Evora 400 2018
Страница 2: ...E132T0324JA Federal Evora 400 From SOP OHB English Language indd 2 15 08 2018 14 46 14 ...
Страница 13: ...13 NOTES E132T0324JA Federal Evora 400 From SOP OHB English Language indd 13 15 08 2018 14 46 17 ...
Страница 127: ...127 E132T0324JA Federal Evora 400 From SOP OHB English Language indd 127 15 08 2018 14 48 10 ...