Adjust your air compressor’s output air flow and
pressure and make it is adequate to machine, open the
valve of your air compressor.
Use the flow meter which comes with your package
and test the air flow of your torch before use.
Press the trigger on the torch, electromagnetic valve
is starting and burner of torch should have air flowing
out. Make sure the metal ball is in the RED range so that
the output air flow is in a proper rate
Adjust the Pressure-Reducing Valve
②
and set the
input PSI for your cutting or gouging.
Turn the adjustment knob
○
6
to adjust the post flow
delay time.
Set the output AMPs
Press the trigger on the torch, electromagnetic valve is starting and burner of torch
should flow out gas and the Burner of pilot-arc cutter should spurt fire.
Turn the adjustment knob
○
6 to change the amperage. Make sure cutting current is
adequate to machine specifications according to thickness of cutting piece.
Keep a distance of 0.06Inch(1.5mm) from copper tip from the work piece, press the
trigger of the torch and burn/strike arc, sparks of arc striking will diminish
immediately. User can begin to cut.
