POWER SUPPLY RATINGS
Supreme CUT60D
Specification
220/240 V
110/120 V
Inverter Type
MOSFET
Minimum/Maximum Rated Output
20 A/88V - 60 A/104 V
20 A/88V - 30 A/92 V
Start Type
Blow-Back Type
Torch Type
TRAFIMET ERGOCUT S65 with Central Connector
Duty Cycle @ Rated Amps/Volts (40° C)
1
(Output V/A)
60% @ 60 A/104 V
100% @ 46 A/98.4 V
60% @ 30 A/92 V
100% @ 23A/89.3 V
OCV (U0)
309 V
Voltage Input (U1)
Standard 220/ 240 V (+-15%)
50/60Hz 1 Phase
Standard 110/ 120 V (+-15%)
50/60Hz 1 Phase
Maximum Inrush Amps (I1MAX)
44.5 A
39.4 A
Maximum Rated Effective Amps (I1EFF)
34.5 A
30.5 A
CNC Port
Yes
Air Post Flow Timer
Adjustable
Minimum Air Compressor Requirement
5.5 CFM @ 90 psi/ 30-60 Gallon reserve
Duty Cycle/ Over Current Protection
Yes
Minimum Operating Air Pressure
(Safety Cut-Out Threshold)
35 psi
Recommended Operating Air Pressure
(Set with Air Flow set to “Constant Flow”)
40-75 psi
Maximum Supplied Air Pressure
(From Compressor/Tank)
90 psi
Ideal Cut Thickness (Hand Torch)
4/5” (20mm)
1/3” (8mm)
Ideal Cut Thickness (CNC)
1/2” (12mm)
1/4” (6mm)
Max Severance Cut @ 3 IPM (Steel)
1 1/4”
Minimum Water Ingress Protection Standard
IP21
Efficiency
>85%
Cooling Method
Full Time High Velocity Fan with Tunnel Design
Dimensions (approximate)
20.67 L × 7.87 W × 14.6 H
Weight (Bare Unit)
31.3 lbs.
1
Duty Cycle is percentage of 10 minutes that unit can weld at rated load without overheating.
