27
Important!
The packaged equipment is
always shipped with the screws loosened.
This ensures that the Ø6mm screw,
which restricts the rotation, does not get damaged during transportation or when the product is being extracted
from the packaging.
Once the product has been extracted from the packaging, it is possible to choose the position, as shown in the
illustration.
Fig. A
Fig. B
Fig. C
The three illustrations show the possible positions taken on by the product: horizontal or vertical.
In fig. C, provided for the assembly of the Darwin with pre-filters and post-filters, the body of the aspirator must
be released from its support (cradle) and moved on holes prepared in the underlying transverse beam (except
for the Darwin 600, in which there is only one transverse beam).
In this position, the aspirator can only be used in a horizontal position.
4.3.1. Determination of the functioning position: Horizontal or Vertical
In order to rotate the equipment, having the N°2 Ø8 screws as a fulcrum, “screw 1” must be slightly loosened to
enable movement, after which “screw 2” must be unscrewed, making it exit from the seat made in the body of
the aspirator.
Once the required rotation has been carried out (either Vertical or Horizontal), re-screw “screw 2”, making it
return back to the appropriate seat and tighten completely “screw 1”.
Enlargement
A
Screw 2
Screw 1
A
DARWIN Horizontal
DARWIN Vertical
Prefilters/Postfilters
DARWIN Horizontal
Prefilters/Postfilters
EN
