Lorex Vantage LH010 ECO BLACKBOX SERIES, Инструкция по эксплуатации, Страница: 65 / 142

47
Using the Main Menu
If you want to use Lorex’s email server
(recommended):
1 In the Email drop-down menu, select
Default .
2 In the Sender Email field, enter the email
address of the sender. This can be any
email address of your choice.
3 In the Receiver Email field, enter the
email address you want the DVR to send
alarm notifications to.
4 In the Interval drop-down menu, enter the
Duration the DVR must wait before
sending out a new notification.


For example, if you select a 3 minute
interval, the DVR will send out email
notifications every 3 minutes until the DVR
stops detecting motion. The DVR will only
send out notifications when it detects
motion triggers.
5 Click Apply to save your settings.
If you select "Enable", and want to use
your own email server:
1 Configure the following:
•
SSL : Select ON/OFF to enable/disable
Secure Socket Layer protocol.
• SMTP Port : Enter your SMTP address.
• SMTP Server : Enter your SMTP Server.
• Sender Email : Enter the sender email
address. This can be any address of your
choice.
• Sender Password : Enter your email
server’s password.
• Receiver Email: Enter the recipient’s
email address.
• Interval: Enter the interval the DVR waits
before sending a new email notification.
2 Click Apply to save your settings.
Changing the Mobile Connectivity
Port, User Name, and Password
To connect to your DVR using a mobile
device, you must complete the
entire
remote setup process described in
“Setting up your DVR for Remote
Connectivity” on page 56.
Use the steps below to change your
Mobile Port or the user name and
password used to connect with a mobile
device.
To configure mobile connectivity
settings:
1 Click the Mobile tab.
2 If you want to change the user name and
password used to connect to the DVR using
a mobile device:
• Under User Name , enter a new user
name. Under Password , enter a new
password.
• By default, the user name is admin and
the password is 0000 to connect with a
mobile device.
3 To change the Mobile port, click the field
beside
Mobile Port to enter a new port.
Select Default