5
16-Channel
1
Video Input
: Connect BNC cameras.
2
Video Output
: Outputs the DVR interface to a BNC connection. This allows you to see your
mouse cursor and have full control of the system on a secondary monitor. To switch the
mouse and system interface between BNC and VGA monitors, press
0
three times on the
remote control.
NOTE:
Use a BNC to RCA adapter (not included) to connect the DVR to RCA inputs (i.e. for a TV
connection).
3
Audio Output
: Output for 1 RCA audio channel (e.g. speakers).
4
Audio Input:
Input for 4 RCA audio-enabled cameras (not included).
5
HDMI:
Connect to an HDMI monitor or TV (not included) to view the system interface.
6
VGA
: Connect a VGA monitor (not included) to view the system interface.
7
LAN
: Connect a CAT 5 RJ45 Ethernet cable for local and remote connectivity.
8
USB Port
: Connect a USB mouse (included) or USB flash drive (not included) for data backup
or firmware updates.
9
RS485/Alarm Block
: Connect compatible PTZ cameras (not included) or alarm sensor
devices (not included).
10
DC12V
: Connect the included AC power adapter.
11
On / Off Switch
:
Turns the DVR on or off.
12
IR EXT:
Service only; not supported.
4
6
9
2
1
12
3
8
7
5
11
10