113
Appendix B: Connecting a PTZ Camera
3
Configure the following according to your PTZ
camera’s specifications:
•
Channel
: Select the channel the PTZ camera
is connected to.
•
Protocol
: Select from
Pelco-D
or
Pelco-P
•
Baud rate:
Select the PTZ camera’s baud
rate
•
Data Bit
: Select from
5~8
data bits.
•
Stop Bit
: Select from
1
or
2
stop bits.
•
Parity
: Select from
None, Odd, Even, Mark
or
Space
.
•
Cruise
: Select
Enable
to enable PTZ cruise.
•
Address
: Enter the PTZ camera’s address
Use the Copy To drop-down menu to copy the
PTZ settings to multiple channels.
4
Click
Apply
to save your settings.
Using the PTZ Menu (Local DVR)
To control the PTZ camera locally on your DVR:
1
Select the channel that the PTZ camera is connected to.
2
Right-click and press the PTZ button (
). Enter the system password. The PTZ menu
opens.
3
Use the on-screen PTZ controls to control the camera.
Channel:
Select the channel the PTZ
camera connects to.
Click the
+
and
-
symbols to
adjust the camera Zoom,
Focus and Iris settings
Direction keys:
Click to pan and tilt the camera
Speed Slider:
Increase or decrease the pan and tilt
speed
Camera Pre-set
controls