23
SETUP [2]
CHN
Controls the CHANNEL settings on the Observation System. Use the SHUTTLE (JOG) to
navigate to the Name, Dwell and Alarm options, and press ENTER (press down on the
SHUTTLE) to adjust the options.
Continue pressing the ENTER (SHUTTLE) button to switch between options within the CHN
menu, and turn the SHUTTLE (JOG) to adjust the setting.
1.
NAME
- Changes the Camera NAME setting. Use the SHUTTLE JOG to switch between
CHANNELS, and press ENTER to begin changing the NAME (to a maximum of 8 characters).
Use the SHUTTLE to change the letters / numbers, and continue pressing ENTER to move left
within the name.
Press the MENU key to exit back to the SETUP [2] submenu.
2.
DWELL
-
Changes the length of time each Camera is displayed in SEQUENCE mode (Single
and QUAD Display). Use the SHUTTLE JOG to switch between CHANNELS, and press ENTER
to begin changing the DWELL Length. Use the SHUTTLE to set the length between 01 seconds
to 60 seconds, or OFF.
Press the MENU key to exit back to the SETUP [2] submenu.
3.
ALARM
- Changes the alarm type for each Channel. Use the SHUTTLE JOG to switch between
CHANNELS, and press ENTER to begin changing the ALARM Type. Use the SHUTTLE to set
the ALARM type to N/O (Normally Open) or N/C (Normally Closed).
Press the MENU key to exit back to the SETUP [2] submenu.
To exit the DATE-TIME menu, press the MENU key on the front panel of the Observation
System.
PREV / EXIT
PREV
- Switch to the first SETUP page. Use the SHUTTLE (JOG) to navigate to the PREV
option, and press ENTER (press down on the SHUTTLE) to access SETUP [ 2 ].
EXIT
- Exits the Menu Setup. Use the SHUTTLE (JOG) to navigate to the EXIT option, and press
ENTER (press down on the SHUTTLE) to exit the Menu.
NOTE
: Pressing the MENU button will also exit the menu.
