12
SG17F6584 - Front
SG17F6584 - Front
8.
PIP
BUTTON
- Display a main camera image with secondary camera
sub-images:
• PIP (Picture In Picture) allows you to view two locations simultaneously,
one being the main channel, and the other being viewed as small
image on the screen. To change the PIP location, see Menu Controls
on Page 21.
9.
SEQ BUTTON
- This function is used to Sequence between all camera locations in Full Screen
and QUAD modes in sequential order. The letters
SEQ
will appear in the on-screen display
during sequencing and QUAD MODE display.
• To change Sequence settings through the
MENU
, refer to Page 21.
To exit Sequence Mode, Press the
SEQ
button again.
10.
ZOOM BUTTON
- This monitor is equipped with 2 times digital
ZOOM
. To utilize this feature,
proceed as follows:
• Set the monitor to Full Screen mode or Quad mode for the desired location
• Press the
ZOOM
button.
ZOOM
mode is now active
• Use the SHUTTLE (JOG) CONTROL knob on the front of the Observation System to move
the area being captured in 2x
ZOOM MODE
. Press the SHUTTLE CONTROL ENTER button
to activate ZOOM Mode.
• To exit
ZOOM MODE
, press the
ZOOM
button again.
8
9 10
PIP MODE
