Lorex RV453, Инструкция по эксплуатации

Страница: 7 / 16

7
RV453 - Back
RV453 - Back
1. CAMERA 1 / CAMERA 2 INPUTS - Allows 2 Cameras (4-Pin) to connect to the system.
• Connect the provided camera to the first channel (C1).
• An additional camera can be connected to C2 (not included).
• Connect the B&W video camera to the monitor with the supplied cable.
• The monitor supplies power to the cameras
2. VIDEO OUTPUT - Connects the system video to a second TV or monitor using a Video RCA
cable (not included), or to the Video input of a VCR/DVR for recording.
3. AUDIO OUTPUT - Connects the system audio to a second TV or monitor using an Audio RCA
cable (not included), or to the Audio input of a VCR/DVR for recording.
4. EXTERNAL SPEAKER PORT - Connects the system to external Speakers (not included).
5. MIRROR / NORMAL SWITCH - Changes the view on Camera 1 and Camera 2 to Mirrored or
Normal view.
NOTE: This switch has been set to Mirror (Reversed Image) during production. When viewing
behind the vehicle when reversing, confirm that this switch is set to the MIR position. Make sure
the image appearing on the display is reversed right to left, just as it appears in a rear-view
mirror.
6. POWER CONNECTOR - Insert the supplied power cable connector firmly until it is locked in
place. To remove the power connector, press and hold the clip, and pull out.
1 2 3 4 5 6