background image

3

General Precautions

FCC CLASS B NOTICE

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception (which can be determined by turning the equipment on 
and off), the user is encouraged to try to correct the interference by one or more of the following measures:

z

Reorient or relocate the receiving antenna

z

Increase the separation between the equipment and receiver

z

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected

z

Consult the dealer or an experienced radio or television technician for assistance

LOREX TECHNOLOGY INC.

http://www.lorexcctv.com

NOTE

This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it 
is designated to provide reasonable protection against interference and will not cause interference with other appliance 
usage.

However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in 
damage to the unit, electrical shock and fire hazard injury

In order to improve the feature functions and quality of this product, the specifications are subject to change without 
notice from time to time.

General Precautions

1. All warnings and instructions of this manual should be followed

2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth 

for cleaning

3. Do not use this unit in humid or wet places

4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked

5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables 

to protect the unit from electrical surge

Содержание RV453

















Отзывы: