Lorex RV453, Инструкция по эксплуатации

Страница: 11 / 16

11
Full Connection Diagram
Full Connection Diagram
1. Connect the RED wire to the (12V – 32V DC) power terminal, which powers the system when
the ignition key is turned on the vehicle.
2. Connect the BLACK wire to a metal portion of the vehicle or the negative battery post.
3. Connect the BROWN wire to the switched power output terminal of the “R” (reverse) gear.
4. Connect the WHITE wire to the Dimmer line.
Operating Instructions
• When you turn the ignition key to the ON position, power is supplied to the monitor. The
monitor will automatically be in standby mode, even if the Power button is not pushed in.
• When you push the power button you can manually view the picture from the camera(s).
• When the power button is not pushed in, and you shift the gear into reverse, the monitor will
automatically display the image from selected Camera (if the Auto/Manual switch is in the
AUTO position).