Lorex LW2760 Series, Руководство пользователя

Страница: 44 / 72

Settings 13
13.4.1 IP Addressing Options
CAUTION
This section is for advanced users only.
To enable dynamic IP addressing:
NOTE
Dynamic IP addressing is enabled by default.
1. Press . Move the joystick left / right to highlight Settings and push the joystick to
select.
2. Select Network and push the joystick to confirm.
3. Select Network Setting .
4. Select Dynamic IP , then select On . Push the joystick to confirm.
5. Press until all menus are closed.
To enable static IP addressing:
NOTE
• A static IP address is not required for remote access to the system.
• You may have to configure your router settings if the DHCP server is enabled.
1. Press . Move the joystick left / right to highlight Settings and push the joystick to
select.
2. Select Network and push the joystick to confirm.
3. Select Network Setting .
4. Select Static IP .
5. Highlight the IP Address field and push the joystick. A cursor appears.
6. Move the joystick up / down to change values, and move the joystick left / right to move
the cursor. Push the joystick to confirm the value in the IP address field.
NOTE
Ensure you enter a static IP address that is not in use by another device in your network.
#LX400077; r.43964/43966; en-US
38