Lorex E861AB-E, Руководство пользователя

Страница: 102 / 122

Pan/Tilt/Zoom (PTZ) Cameras 19
4. Under Patrol No. , enter the number of the tour you want to create.
5. Under Preset , select a preset you want to add to the tour.
6. Click Add Preset .
7. Repeat steps 5 & 6 to add additional presets to the tour.
To run a tour:
• Under No. , select the number of the tour you want to go to, then click .
19.6 Patterns
Patterns automatically move the camera according to manually-entered movements.
To add patterns:
1. From the Live View display of your PTZ camera, right-click to open the Quick Menu, then
click Pan/Tilt/Zoom .
2. The PTZ controls open. Click to open advanced PTZ controls, then click .
3. Click the Pattern tab.
4. Under Pattern , enter the number of the pattern you want to create.
5. Move the camera to the desired starting position, then click
Start
.
6. Using the on-screen controls, move the camera in any pattern you wish. When finished, click
End
.
To run a pattern:
• Under No. , select the number of the pattern you want to go to, then click .
19.7 AutoScan
An autoscan automatically cycles between a left and right point.
To configure autoscan:
1. From the Live View display of your PTZ camera, right-click to open the Quick Menu, then
click Pan/Tilt/Zoom .
2. The PTZ controls open. Click to open advanced PTZ controls, then click .
3. Click the Border tab.
4. Move the camera into the desired left position and click Left .
5. Move the camera into the desired right position and click Right .
To run autoscan:
• Click .
#LX400117; r. 6.0/57895/57895; en-US 94