Lorex E861AB-E, Руководство пользователя

Страница: 101 / 122

Pan/Tilt/Zoom (PTZ) Cameras 19
1. No.: Enter the ID number for a preset, tour, or pattern you want to activate.
2. Preset: Move the camera to the preset number specified in the No. field. For instructions on
setting up preset locations, see 19.4 Presets , page 93.
3. AutoPan: Set the camera to rotate 180° back and forth.
4. Tour: Perform the tour number specified in the No. field. For instructions on creating a tour,
see 19.5 Tours , page 93.
5.
Flip:
Rotate the camera 180° from its current position.
6. Pattern: Perform the pattern number specified in the No. field. For instructions on creating
a pattern, see 19.6 Patterns , page 94.
7. Reset: Move the camera to the home position.
8. AutoScan: Move the camera between a predetermined left and right point. For instructions
on creating an autoscan, see 19.7 AutoScan , page 94.
9. Configuration: Click to open the configuration menu, where you can configure presets,
tours, patterns and autoscans.
10. OSD Menu: Click to open the camera’s OSD menu. This may not be supported on all cam-
era models.
11. Auxiliary Settings: Not supported.
19.4 Presets
Presets will save a camera position for quick retrieval.
To add preset locations:
1. From the Live View display of your PTZ camera, right-click to open the Quick Menu, then
click Pan/Tilt/Zoom .
2. The PTZ controls open. Click to open advanced PTZ controls, then click .
3. Click the Preset tab.
4. Enter the number of the preset you want to create under Preset .
5. Move the camera to the desired position and click Set .
To go to a preset location:
• Under
No.
, select the number of the preset you want to go to, then click .
19.5 Tours
Tours will cycle through a set of presets.
To add tours:
1. From the Live View display of your PTZ camera, right-click to open the Quick Menu, then
click
Pan/Tilt/Zoom
.
2. The PTZ controls open. Click to open advanced PTZ controls, then click .
3. Click the Tour tab.
#LX400117; r. 6.0/57895/57895; en-US 93