(4) PLAY :
LED will be ON when playing data that has been stored into the HDD.
(5) REC :
LED will be ON when recording data into the HDD.
13. HDD LED
–
Displays when the HDD is in operation
14. HDD POWER LED
15. Removable Cartridge Casing
The DVR comes with a removable hard disk drive tray.
Note: The HDD should be installed prior to turning the DVR ON
BACK PANEL :
-6-
12
1 2
11
9
10
CAMERA IN
VIDEO IN
1
2
MONITOR OUT
4
3
VIDEO
1
AUDIO IN
SLAVE OUT
VIDEO
AUDIO
2
3
AUDIO
4
SERIES OUT
TRIGGER OUT
IDE-SUB
ALARM
1
2
3
GND
4
WARNING OUT
RS-232C
USB
POWER
AC90-240V
50/60Hz
6
CAMERA IN
VIDEO IN
1
2
MONITOR OUT
4
3
VIDEO
1
AUDIO IN
SLAVE OUT
VIDEO
AUDIO
2
3
AUDIO
4
SERIES OUT
TRIGGER OUT
IDE-SUB
ALARM
1
2
3
GND
4
RS-232C
USB
POWER
AC90-240V
50/60Hz
3 4 5
8
7
RS-485
+ -
1.
DIN &
BNC Camera Inputs -
Channel 1-4 camera inputs (for cameras with
either DIN or
BNC Video
outputs)
2. RCA Audio inputs -
Channel 1-4 Audio inputs (for cameras with RCA Audio outputs)
3. Monitor A/V Out -
Audio/Video output to another monitor.
4. Slave A/V Out -
Audio/Video output signal for transmitting to a Slave Monitor or
VCR.
5. Alarm Function Terminals -
These terminals are used to connect external motion
sensors, door/window contacts, etc.
6. Trigger Out -
When this terminal is connected it sends a signal to another device,
such a VCR to trigger recording
7. RS-485 Terminals -
Connect the PTZ control wires to these terminals
8. USB Port -
Connects to a PC using a USB cable
9. IDE-SUB -
This connector is used to connect an external Slave HDD.
10. RS-232C Terminal -
Connects to the RS-232C terminal on your computer.
11. MAIN POWER SWITCH -
Used to turn the system ON or OFF.
12. AC INPUT -
Connects to a Power Plug (AC 90-240V, 50/60Hz).