STANDARD WIRED CAMERA:
1.
Camera Lens – Delivers high quality image by using a 1/3” CCD Image Sensor
2.
PIR Sensor – Detects movement/motion within 10 -15 ft
3.
Speaker – Delivers sound from the monitor to the camera
4.
Camera Input – Connects cable to the monitor
5.
Bracket – Metal bracket connects to camera for mounting to walls, ceilings or table
6. Microphone – Picks up sound around the camera
INSTALLATION
A. Camera Unit
Permanent installation using metal camera bracket
IMPORTANT NOTE:
Keep camera installed away from direct sunlight. Also avoid places where humidity
is high or unable to protect from rain. The mounting bracket must be attached to a structural
device such as wall stud or ceiling rafter using suitable fastener.
-16-
An optional LOREX camera (6 pin DIN) can be connected to the DVR as shown below
1
2
3
5
4
6
