(2) SEQ :
Used to sequence between all camera locations in full screen in sequential order with the
screen automatically switching. Press SEQ again to stop sequential viewing. Sequence
settings are programmable via the Menu, refer to page 8 for more details.
4. A-SEL / MENU
- This button performs two functions:
(1) A-SEL:
In Quad mode, you can select the channel with audio. Pressing this button automatically
changes the audio from channel to channel. An audio microphone symbol will appear in the corner
of a Quad screen to indicate audio is available on a particular channel.
(2) MENU:
Holding this button for 3 seconds brings up the Main Menu. Please refer to page 7 For
more information on Menu options.
5. TALK
- By pressing and holding this button the user has the ability to talk to a specific camera
location. This button must be pressed the entire time, while talking. To listen to the camera
location, release the Talk button.
6. SEARCH -
Pressing this button brings up the Search menu, which allows you to quickly find recordings.
For more information on Search options, please refer to page 12.
7. REC -
Initiates manual recording.
8. PAUSE / STOP / FF / REW / PLAY
(1)
PAUSE
:
This button serves 3 functions:
a) Press this button to pause video in playback.
b) Used to scroll Up in the Menu option screens..
c) Brings up the Pan/Tilt Zoom feature. For more information on Pan/Tilt Zoom, refer to
page 14.
(2)
STOP
:
This button serves 2 functions:
a) Press this button to stop in video playback.
b) Used to scroll Down in the Menu option screens.
(3)
FF
:
This button serves 2 functions:
a) Begins high-speed forward playback during playback.
b) Used to scroll Right in the Menu option screens.
(4)
REW: This button serves 2 functions:
a) Begins high-speed reverse playback during playback.
b) Used to scroll Left in the Menu option screens.
(5)
PLAY
:
This button serves 2 functions:
a) Initiates video Playback. For more information on Playback, refer to page 13.
b) This button serves as the ENTER key in Menu mode.
9. REMOTE CONTROL SENSOR
10. POWER / KEY LOCK
- This button serves two functions:
(1) POWER: Turns the DVR ON/OFF. A red LED indicator light turns ON when
the DVR is in Standby mode. Press the button to turn the power ON.
(2) KEY LOCK: Holding this button for 3 seconds initiates Key Lock, which allows
you to
“
Lock
”
the buttons on the system. Locking disables the buttons and
prevents other people from using the system.
11. MICROPHONE
12. LED indicators -
Represent status of operation.
(1) HDD :
Blinks when HDD is being accessed (via recording or playback).
(2) HDD FULL :
In case OVERWRITE menu is set up, LED does not blink in any case.
LED blinks if HDD is used below 1GB of storage space, and remains
ON when HDD is FULL.
(3) ALARM :
LED will be ON when the ALARM or MOTION function is set to ON.
when the ALARM or MOTION function is detected, the LED will blink
as an Alarm is being triggered.
-5-
