Lorenz MAGNUM PLUS Скачать руководство пользователя страница 105

Страница: 105 / 124

107

User Manual

ing, Date and Time and selects the Cursor Control function.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER'

SNR = Signal to Noise Ratio

The ratio of the magnitude of a signal that of the noise (interference).

SOG = Speed Over Ground

A calculation of the rate of movement of the ship over the ground.

Speed

The current velocity at which you are travelling, relative to a ground location.

Speed Filter

Turns On/Off the Speed Filter. When it is On, you can filter the speed of the ship, to optimize it. The

default setting is Off.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "FIX " + 'ENTER' + "SPEED FILTER" + 'ENTER'

Speed (Simulation)

Sets the value for speed in the Simulation mode. The default setting is 01.0 Kts.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' + "SPEED" + 'ENTER'

Speed (Unit)

Sets the speed unit among Kts = knots, Mph = miles per hour e Kmh = kilometers per hour. The

default setting is Kts.

'MENU' +

"BASIC SETTINGS" + 'ENTER' + "SPEED" + 'ENTER'

Static Navigation

Sets up a threshold for the speed. When the speed received from the positioning device is under that

threshold, the chart plotter displays zero. The default value is 0.0 Kts.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "STATIC NAVIGATION" +

'ENTER'

Step Unit (Track)

Choose Distance (Dist) - the chart plotter can store a fix when the distance from its last stored position

is greater than a defined distance; Time - the chart plotter can store a fix after a defined time; Auto - the

software decides when storing a position, on the basis of the straight or curved track. The default

setting is Time.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP UNIT" + 'ENTER'

STR = Steering

The difference between COG and CTS. If COG is 25° and CTS is 30°, then STR is 5° Right.

Target

In order to tag on the chart the point, towards which the ship is Heading, you can use a special mark,

called Target. When the Target is placed, all navigation data are referred to this Target (see Par. 3.4,

4.1.1.4, 4.2.1.3, 4.2.2.3).

Inserting Target : place 'DEST'

Deleting Target (Basic Mode) : place cursor on 'CLEAR'

Deleting Target (Advanced Mode) : place cursor on 'ENTER' + 'DELETE' + 'ENTER'

TD = Time Difference

Loran-C positions are determined by precise timing of the intervals between reception of pulses trans-

mitted by pairs of stations in the selected chain. Between any two stations a ship must be located

somewhere along a line of possible positions where the measured Time Difference, TD, between ar-

rival of pulses from those stations would be observed. The TD is measured from the time of reception

of the master station signal to the time of reception of the slave station signal.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE

SYSTEM" + 'ENTER' + "TD" + 'ENTER'

Содержание MAGNUM PLUS





























































































































Результаты поиска

Содержание MAGNUM PLUS

Отзывы:

Бренды по названию

Популярные бренды

Lorenz MAGNUM PLUS, Руководство пользователя

Результаты поиска

Содержание MAGNUM PLUS

Отзывы:

Бренды по названию

Популярные бренды