Lord MicroStrain G-Link-200, Руководство пользователя

Страница: 25 / 70

G-Link
®
-200
User Manual
24
5. Wireless Sensor Sampling Configuration
5.1 Start Collecting Data
There are several ways to collect data from the G-Link-200, including from a single node, a network of
nodes, or restarting the last used sampling mode, by pressing and holding the start button until the LED
light turns blue.
l
Single node - From Devices, select Node > Sampling > Apply and Start Network to begin
collecting data from a single wireless sensor.
Figure 15 - Single Node Sampling
l
Network of Nodes - From Devices, select > Base Station > Sampling Network > Nodes to
be sampled > Apply and Start Network to start collecting data from a network of wireless
sensors.
Figure 16 - Network of Nodes Sampling