Lord MicroStrain G-Link-200, Руководство пользователя

Страница: 15 / 70

G-Link
®
-200
User Manual
15
3.3.2 Add A Node Manually
Adding a node manually requires entering the node address and its current frequency setting.
From the Base Station, select the Manual Add Node tile, enter the Node Address, last known
Frequency (factory default is 15), and select Add Node.
Figure 6 - Add Node By Address
If the node was successfully added, two confirmation messages will appear and it will be
listed under the Base Station.
Figure 7 - Add Node Confirmation