Lord MicroStrain 6316-0010, Руководство пользователя

Страница: 34 / 66

IEPE-Link
™
-LXRS
®
Wireless Sensor Node
User Manual
Powering the Node
34
5. Powering the Node
Apply only the input voltage range specified for the node in the
polarity indicated. Failure to do so could result in personal
injury and permanent damage to the node. For important
safety considerations see Safety Information on page 60 .
The node can be powered with the internal battery or an external source. These sources cannot
be used simultaneously. When the node is manufactured, the switch is set to operate using the
internal battery.
External battery holders are available for the IEPE-Link
™
-LXRS
®
and can be used to extend
battery operating capacity and duration. For more information see Node Accessories on page 52 .
5.1 Selecting the Power Source
There is user-accessible switch inside of the node to select the power source. The following
steps describe how to change between internal battery operation and an external power
source:
The IEPE-Link
™
-LXRS
®
contains an internal, rechargeable
Lithium Polymer (Li-Po) battery. For important precautions
see Safety Information on page 60 .
The electronics within the node are sensitive to static and
moisture. Do not touch the internal circuitry or expose to
liquids. Verify the node power switch is OFF and the power
supply disconnected before servicing.
The IEPE-Link
™
-LXRS
®
is susceptible to damage and/or
disruption of normal operation from Electrostatic Discharge
(ESD). For important precautions see Safety Information on
page 60 .