Lord MicroStrain 3DM-GX4-45 Скачать руководство пользователя страница 56

Страница: 56 / 78

3DM-GX4

™

-45

™

Inertial Navigation System

User Manual

OEM System Integration

7.4

Sampling on Start-up

The Save Current Settings command (

see Saving Configurations on page 17

) can be used to

instruct the sensor to start streaming data as soon as it powered on. This can be useful in

sensor integration applications in which immediate data acquisition is desired. To accomplish

this, data streaming is activated with all desired settings before the Save Current Settings

command. This technique will not work in MIP Monitor because it automatically puts the sensor

in idle mode in order to allow device configuration.

For more information refer to the "Startup Settings" Technical Note on the LORD MicroStrain

website, or contact LORD MicroStrain

Technical Support (

see Technical Support on page

7.5

Connecting to a Datalogger

Many inertial applications incorporate dataloggers, of all different types, to collect and distribute

sensor outputs. For more information and examples refer to the "Using Dataloggers with

Inertial Sensors" Technical Notes on the LORD MicroStrain

website, or contact LORD

MicroStrain

Technical Support (

see Technical Support on page 63

7.6

Using Wireless Adapters

In some applications it can be very useful to utilize wireless communications from the sensor to

the host computer. One way this can be accomplished by connecting the serial output of the

sensor to a serial to wireless converter, and connecting the wireless receiver to the host

computer. For more information and an example refer to the "Using RS232 Bluetooth

Adapters" Technical Notes on the LORD MicroStrain

website or contact LORD MicroStrain

Inertial Sensor ProductsTechnical Support (

see Technical Support on page 63

Содержание 3DM-GX4-45















































































Результаты поиска

Содержание 3DM-GX4-45

Отзывы:

Lord MicroStrain 3DM-GX4-45, Руководство пользователя, Страница: 56 / 78

Результаты поиска

Содержание 3DM-GX4-45

Отзывы: