Lord MicroStrain 3DM-CX5-10, Руководство пользователя

Страница: 29 / 42

25
3DM
®
-CX5-10
USER MANUAL
Pin Number Net Name Function
1
USBDM USB DATA - *
2
USBDP USB DATA + *
3
Vin Power
4
RxD UART receive (host to CV5)
5
TxD UART transmit (CV5 to host)
6
GPIO3 Logic Level GPIO
7 GPIO1 Logic Level GPIO (and pps input)
8 GND Signal Ground & Power Supply Return
9 GPIO2 Logic Level GPIO
10 Disable Logic Level Disable (Open or Low = Enable)
Mounting Holes Chassis Chassis Ground
* USB is not available on the 3DM-CX5-10 and may be left connected to USB or unconnected.
Figure 23 - Pin Locations and Functions
7.4 Sampling on Start-up
The Save Current Settings command can be used to instruct the sensor to start streaming
data as soon as it powered on. This can be useful in sensor integration applications in which
immediate data acquisition is desired, and connection to MIP Monitor for data logging is not
required. This functionality can also be embedded in user- designed applications by using the
corresponding LORD Sensing MIP Data Communications Protocol (DCP) command. To view
or download the DCP Manual, go to: http://www.microstrain.com/support/documentation , from
the drop-down menu select 3DM-CX5-10, and then select document from the list.
NOTE:
When setting the sensor to begin sampling on start-up, verify that the sensor is
sampling by reading the status indicator on the device, or view the serial data stream
from the host computer. If communication with MIP Monitor is established, the
sampling will stop to facilitate device configuration.