30
Operation
© Travis Industries
4141007
100-01402
Menu Button
The menu button allows access to the
internal settings on the heater. To access,
press the menu button (the screen below
will be shown). Press the menu button
again to scroll through the options listed
below.
T-Stat Temperature
Use the Heat Setting slider on the touch
screen to adjust the internal thermostat
target temperature.
NOTE
: If the T-Stat Source is set for
external (see below), this setting will not
appear.
T-Stat Source
Use the Heat Setting slider on the touch screen to select either the internal thermostat (stock) or
external thermostat.
NOTE
: this setting is typically set once and not adjusted. If using an external thermostat, set it to
external. If you do not have an external thermostat, leave this setting at “Internal Thermostat”.
T-Stat Program
Use the Heat Setting slider on the touch screen to set the Thermostat Program (see page 27).
Screen Lock
Use the Screen Lock feature to disable unwanted touch-screen input. This is typically done to prevent
children or pets from inadvertently adjusting the heater.
TO
LOCK
THE
STOVE,
Press
the
menu
button
until
the
Lock
Stove
menu
appears.
Select
the
“Locked”
option
then
WAIT
30
SECONDS
FOR
THE
DISPLAY
TO
DIM
.
The
heater
is
now
in
locked
mode.
TO
ADJUST
SETTINGS
IN
LOCK
MODE
Move
your
finder
from
left
to
right
on
the
Heat
Setting
slider.
Settings
may
then
be
adjusted.
TO
UNLOCK
THE
STOVE
Press
the
menu
button
until
the
Lock
Stove
menu
appears.
Select
the
“Unlocked”
option.
Operating Statistics
To access the operating statistics:
a) Press the menu button once (the screen shown
to the right will appear).
b) Slide your finger across the heat setting slider
to access the statistics:
-- Hour Meter – slide once, left to right.
-- Average Start Time – slide twice, left to right.
-- Fault Record – slide three times, left to right.
Viewing the Firmware Version
To view the firmware version, press the menu button (the screen shown above will appear). Then slide
your finger right to left. The firmware version will appear.
Press for next setting.
Change setting with slider.
Use buttons to exit.
Heat Setting
Fan Setting
Press for next setting.
Change setting with slider.
Use buttons to exit.
Heat Setting
Fan Setting
