Look Solutions Radio Remote, Руководство по эксплуатации

Страница: 5 / 16

5
2. The Transmitter
2.1 Operation
The radio transmitter is supplied in a usable state with the battery already
installed.
To transmit press one of the four buttons (1, 2, 3 or 4). If the key is pressed too
briefly, the receiver ignores the command. For receiving several consecutive code
cycles must be received and identical before a command is recognized as valid.
While sending the signal, the transmitter should be in your hand and pointed
away from your body. If your hand cover the integrated antenna, or you approach
a large metal surface/area, the range may be reduced. This should therefore be
avoided.
The radio remote is supplied with the first button pre-programmed and the
connected machine will be activated by pressing this button, running as long as
the button is held down. Buttons two to four have no function yet.
The configuring and also the deleting of the configuring will be described in
chapter 3.1 to 3.3.
Button 1
Button 2
Button 3 Button 4
red LED
Screw
Transmitter front