Look Solutions Radio Remote, Руководство по эксплуатации

Страница: 11 / 16

11
3. The Receiver
The procedure can now be repeated if the configuration of further buttons is
requested for the same receiver. Up to six buttons can be saved for one receiver.
If more then six buttons will be configured, the previous configurations will be
overwritten.
You can configure several receivers on the same button. All receivers will then
be activated at the same time and for the same running period.
If the receivers should react on different buttons, repeat the above mentioned
procedure for each receiver, always configuring a different button at the
transmitter as the Stop-button.
3.3 Deleting the configuration of the buttons
To delete all configurations press and hold the black Configuration-button [1]
for more than three seconds, until the yellow LED [2] lights up permanently. All
configurations have now been deleted.
Please note : All configurations will be deleted, both Start and Stop, no matter
which Mode is currently activated.
3.4 Wiring of the connectors
3-pin XLR male
Pin 1 = Ground Pin 2 = 0 - 10 V DC (+) Pin 3 = 12 V DC (+) input
Mini-Stereo jack (for TINY-FOGGER)
Sleeve = Ground Ring = switch o/p Tip = 12 V DC (+) input