background image

14

6. Warranty conditions

For the 

Radio remote

 Look‘ guarantee is:

1. Free of charge, subject to the following conditions (No. 2 - 6) we will repair any defect or

fault in the unit if it is caused by a proven factory fault and has been advised immediately
after appearance and within 24 month of delivery to the end user. Insignificant deviations
of the regular production quality does not guarantee replacement rights, nor do faults
or defects caused by water, by generally abnormal environment conditions or Force
Majeure.

2. Guarantee Service will be done in the following way: Faulty parts will be repaired or

replaced (our chioce) with correct parts. Faulty units have to be brought to us or our
service centres or to be sent to us or our service centres at customer‘s expenses. The
invoice and/or receipt showing the purchase date and the serial number has to come
with the faulty unit, otherwise this will not be guarantee service. Replaced parts become
our property.

3. The customer looses all rights for guarantee services, if any repairs or adjustments are

done to the units by unauthorized persons and/or if spare parts are used which are nor
approved by us. Also non compliance with the instructions in this manual or mistakes by
incorrect handling/treating of the machine will lead to a loss of guarantee and also any
faults and damages caused by undue force.

4. Any freight costs arrising in connection with the guarantee services have to be born by

the customer.

5. Guarantee services do not cause an extension of the guarantee time or the start of a

new guarantee time. The warranty for replaced parts ends with the guarantee time of
the whole unit.

6. If a defect/fault can not be repaired by us in a satisfactory time, we will, within 6 months

after sale of the unit, on choice of the customer, either:
• replace the whole unit for free or
• refund the lesser value or
• take back the whole unit and refund the purchase price, but not more than the usual
   market price at the time of the refund.

7. Further claims, especially for damages, losses etc. outside the unit are excluded.

Содержание Radio Remote

















Отзывы: