Look Solutions Cryo-Gate, Руководство по эксплуатации

Страница: 15 / 24

15
4. Operating the Cryo-Gate
4.4.4 Operating via Ethernet
Press ETH at the main screen (Fig. 1, line 1) or select SETTINGS –> PROTOCOL . Screen
(Fig. 8/10) appears.
4.4.4.1 Artnet
Select ARTNET (Fig. 8, line 3). The button will change its colour to cyan, showing that
Artnet is activated.
Fig. 8 Screen with activated
ARTNET-Button Fig. 9 Screen to configure
ARTNET
You can adjust the Net, Subnet and the Universe.
– Therefore press the
MODIFY -button (Fig. 8, line 2). The screen shown on the right
(Fig. 9) appears.
Corresponding to the standards for DMX and ARTNET, a Universe consists of 512
DMX-channels. A Subnet contains 16 Universes and a Net 16 Subnets. There are 128 Nets.
– Select NET , SUBNET or UNIVERSE (Fig. 9, line 1), to change the respective value.
Press CE and type in the new value.
– Pressing ARTNET CONFIG SAVE saves the values, BACK switches back to the previous
screen (Fig. 8) without saving the value.
– Press PROTOCOL SAVE (Fig. 8, line 4) to save the ARTNET adjustments.
If you press BACK , you will get back to Settings or the main screen without saving
the values.