Specification
23
2011/01/07
Version:
2.2
2.2f WiFi Installation……
An optional WiFi can be installed on the right side of GFT-150 Terminal.
Package Content
A Mini-PCI card
A detachable antenna
An Antenna line
A U-shape base
A cable clip
Screw x 2
Installing WiFi
1.
Turn off the system power.
2.
Loosen the two screws on both sides as the picture shown below.
3.
Slide out the rear plate (A) and take off the back plate (B). Loosen the screw (C) and slide the
unit outwards to reach the main board.
Note:
Be aware to the LVDS cable while dragging the drawer out. Please do not drag the drawer
too much over, or you may tear off the LVDS cable.
A
C
Loosen
this
screw!
B
