LONGHORN LHD8003, Руководство по установке

Страница: 14 / 33

You can arm away, arm stay, disarm or panic help via keypad or keyfob. If CMS is connected with
message send, and info except zone alarm is set to send, any operation like arm and disarm will be
reported to CMS.
Chapter 7: Ar m/Disar m Operation
7.1 Ar m/Disar m via Keypad or Keyfob
Disarm
Arm-away
Arm-stay
Panic
Figure - - 13
7.1.1 Ar m Away
1. When the system is under disarm, press the button of “Arm away” on panel or keyfob, the status LED
turns from Green into Red with the voice guide “Arm away, close door and window, exit delay starts”
with the music, the LCD display as following:
Arm or disarm is not available during programming or trouble query.Via keypad requires
installer code, while via keypad requires no code.
Exit Delaying:
s
When the exit delay ends, the voice guide will sound “Armed away!”
Arm Away
2 0/ 1 2 / 2 0 1 0
1 5 : 3 0
2. If during zone alarm, press “Arm away” on keypad or keyfob, the voice will guide “Disarm before arm!”
3. If under arm situation, press “Arm away” on keypad or keyfob, the voice will guide “Armed away!”
Alarm!
Arm Failed!
Disarm before Arm!
Arm Away!
7.1.2 Ar m Stay
It enables the system not to alarm in active zone but alarm in other zones.
1. If under disarm, press “Arm stay” on keypad or keyfob, the status LED turns from Green into Red, the
voice will guide “Arm stay” with LCD as following:
Arm Stay
2 0 / 1 2 / 2 0 1 0
1 5 : 3 0
-23- -24-
Note