(1,2)
×
YZ1515x
(1,2)
×
YZ
Ⅱ
15
(1,2)
×
YZ2515x
(1,2)
×
YZ
Ⅱ
25
KZ25
BZ25
DG15-24
DMD25
3
4
#
#
15
24
#
#
#
#
15
24
35
36
#
#
#
#
15
24
35
36
#
24
#
#
#
16
25
17
#
#
#
#
#
#
119
120
15
24
35
36
Single Channel
100 - 1600
Single Channel
100 - 3000
200 - 6000
174 - 1600
Single Channel
50
-
1800
30 - 4000
#
#
#
#
#
#
#
13
14
19
16
25
17
18
Single Channel
4.2 - 2200
#
#
#
#
#
#
#
13
14
19
16
25
17
18
Note: The working speed for DMD25 pump heads is less than 350 rpm.
Acceptable Pump Heads and Tubing
Pump Head Tubing Flow Rates
(
)
mL/min
Single Channel
4.2 - 2200
Changing the Pump Head
The pump head has been installed on drive before leaving the factory.
Please follow below procedure when changing a new pump head is
needed.
1. Loose the tightening screws which connecting the pump head and
the drive. Take down the pump head.
2.
Insert the flat end of the new pump head's shaft to the slot of
drive's coupling. Make the positioning hole of the pump head
match the positioning pin of the drive.
3.
Tighten the screws which connecting the pump head and the
drive. Try your best to tighten the screws in the same degree. Do
not over-tighten the screws to prevent the housing from
deforming. (Please reference the pump head operating manual for
details.)
Shut down the power supply before changing a new pump head.
Check the Pump Head Occlusion
Load the tubing in pump head and insert one side of tubing in
water and blow to the other side. There should be no air bubble in
water. If there is air bubble in water, that's because the wall
thickness of the tubing is too thin to be used in this pump head.
External Control Function
External Control
DB15 Plug
4 to 20 mA speed control
0.5 to 5 V speed control
1 to 10 V speed control
1 to 10KHz speed control
Communication Control RS485
Analog Control
WT600-2J OPERATING MANUAL
WT600-2J OPERATING MANUAL
Communication Control
The pump can connect to control computer (computer, PLC, SCM)
through RS485 serial communication module (shown as below).
Please contact Longer company for communication protocol.
COM
B
A