LongCo Freeliner, Руководство пользователя

Страница: 35 / 56

LongCo: User Manual V08 / 03. Mai 2019
Seite 35 von 56
3.7. Read TFT-Display For example, see picture on the left side:
•
Battery 1 is ON (100%)
• Battery 2 is ON (100%)
• Range : 54 km
• Power cycle bar : 0 % (Power-Chart is gray)
• Setup A (blue RFID-Chip registered)
• Mode: ECO (energy saving)
• TRIP (line): 0 km
• Status-Bar Signs:
§
Turn signal left is OFF (sign arrow left is not green)
§
Front light is ON (sign for front light is green)
§
Reverse is not active (sign “R” is not red)
§
Cruise control is OFF (sign for cruise control is not green)
§
Turn signal right is OFF (sign arrow right is not green)
Batteries can be shown as ON, OFF or STBY (Standby). STBY means that the battery is on but not used,
because the voltage difference is too big. It will be automatically reactivated, when voltage
difference is smaller than 2V and the LongCo came to a complete stop.
Additionally, Status-Bar shows some errors as rolling text from right to left:
o
Low Voltage: In approx. the last 5% of the battery life the power and speed will be reduced,
and the all-wheel drive turned off .
o
Throttle error: Check Throttle
o
Motor 1 (2 or 3) Hall Defect: Defect in the motor or controller 1, 2 or 3
o
Communication Problem - Restart System
o
Motor 1 (2 or 3) over-temp
o
Battery 1, 2 or 3 over-temp, Power reduced
o
Service, contact service