London Electronics INTUITIVE-I, Руководство пользователя

Страница: 5 / 23

General Description
This meter has been designed to be simple to configure. It is easy to use because
no menu is used. Look at the front panel below... to adjust ZERO you press the
ZERO button, to adjust Span you press the SPAN button, to adjust Analogue
Output you press the OUTPUT button, to adjust Alarms you press the ALARM
button. There is no need to spend time learning a complex menu system.
The meter’s main function is to totalise (or integrate) from a linear process
signal. So, it will accept the most common process signals such as 4-20mA, 0-
10V etc. You can use the 24V excitation supply to power 2 wire transmitters, 3
wire transmitters etc.
The meter can give alarm outputs, scaled and isolated analogue output and isolated
serial data retransmission when fitted with option boards.
The front panel has a 6 digit, 7 segment window for displaying the measurement.
It allows decimal point and minus sign characters to be included and has 4
alarm annunciators to show the status of each alarm relay.
The front panel pushbuttons each have an LED to show which setting is being
altered at any time. A clear protective window is provided, behind which you
can fit one of our ‘Units-of-Measure’ labels, to identify the reading as Kg, or
Litres, barrels etc.
A lockout switch on the rear of the meter saves your configuration settings in
non-volatile memory, which has a 10 year guaranteed storage period. If the lockout
switch is not set ON, your settings could be accidentally altered.
DIGIT
Min.
ZERO SPAN / dp
ZERO SPAN & d.p.
MAX / MIN TARE
ALARMS
OK
s
RESET
s
OUTPUT
AL1
AL2
AL3
AL4
0% O/P 100% O/P
Lineariser
Max.
“Units of
measure”
window
Page 3