![LoLo TS-37E-INTL Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/lolo/ts-37e-intl/ts-37e-intl_operators-manual_1938248015.webp)
OM-TS-37E-INTL 15
Troubleshooting
Your LoLo skillet is designed to operate smoothly and efficiently if properly maintained. However, the following is a list of checks to
make in the event of a problem. Wiring diagrams are furnished inside the service panel.
CAUTION: USE OF ANY REPLACEMENT
PARTS OThER ThAN ThOSE SUPPLIED bY LOLO COMMERCIAL FOODSERvICE EQUIPMENT OR ThEIR AUThORIZED DISTRIbU-
TORS CAN CAUSE INJURY TO ThE OPERATOR AND DAMAgE TO ThE EQUIPMENT AND wILL vOID ALL wARRANTIES.
SYMPTOM
whO
whAT TO ChECK OR DO
Pan will not heat, but indicator
light comes on.
Authorized
Service Rep Only
a. Heating elements for short circuit.
Pan will not heat, and indicator
light will not come on.
User
a. That power supply is on.
Authorized
Service Rep Only
b. Fuse, mounted inside control box.
c. For loose or broken wires.
d. Thermostat functioning, by listening for a click when
the switch opens or closes.
e. Contactor functioning.
Pan continues to heat after it
reaches desired temperature.
User
a. Thermostat dial setting. Turn down if too high.
Authorized
Service Rep Only
b. Thermostat functioning.
c. Thermostat calibration.
d. Contactor, to determine if it is de-energized.
Pan does not reach desired
temperature.
User
a. Thermostat dial setting. Turn up if set too low.
Authorized
Service Rep Only
b. Heating elements for ground short or open (burned out) element.
c. Thermostat functioning, by listening for a click when
the switch opens or closes.
d. Thermostat calibration.
e. Contactor functioning.
Rapid clicking noise (chattering).
User
a. For low voltage.
Authorized
Service Rep Only
b. Contactor for dirt or corrosion on the contacts.
Uneven cooking due to “hot
spots”.
User
a. That the pan body is level
Uneven cooking due to “cold
spots”.
Authorized
Service Rep Only
a. For open (burned out) heating element.
Pan is hard to tilt.
User
a. Gears for foreign materials, lubrication and alignment.
ELECTRICAL POwER MUST bE ShUT OFF bEFORE wORK IS DONE ON INTERNAL COMPONENTS.
Содержание TS-37E-INTL
Страница 23: ...OM TS 37E INTL 23 Wiring Diagram...