LOKERMANN GRAND MIG 200 MULTI PFC SYN MV, Руководство пользователя

Страница: 9 / 24

3.3.2 MIG Welding - Gasless wire
Switch the ON/OFF Switch (located on the rear panel) to OFF.
(1) Insert the earth cable plug into the positive socket on the front of the machine and tighten it.
(2) Plug the welding torch into the MIG torch connection socket on the front panel and tighten it.
IMPORTANT : When connecting the torch be sure to tighten the connection. A loose connection
can result in the connector arcing and damaging the machine and gun connector.
(3) Connect the MIG power connection lead to the negative welding power output socket.
Note if this connection is not made, there will be no electrical connection to the welding torch!
(4) Connect the power cable of welding machine with the output switch in electric box on site.
3.3.3 Spool Gun
Switch the ON/OFF Switch (located on the rear panel) to OFF.
(1) Connect the earth cable quick connecto r to the negative welding power output soc ket. Connect
the earth clamp to the work piece. Contact with the work piece must be firm contact with clean, bare
metal, with no corrosion, paint or scale at the contact point.
(2) Connect the spool gun Euro plug to the machine Euro connector.
IMPORTANT : When connecting the torch be s ure to tighten the connection. A loose connection
can result in the connector arcing and damaging the machine and gun connector.