LOKERMANN GRAND MIG 200 MULTI PFC SYN MV, Руководство пользователя

Страница: 14 / 24

4. Operation
4.1 Layout for the front and rear panel
1. Power Led: Power led is lighted when open the machine.
2. Voltage LED: When the voltage LED is on, it display the actual output welding voltage.
3. Wire speed LED: You can use the parameter adjust/ select knob to set the wire speed when the
wire speed LED is on.
4. Current LED: When the current LED is on, it display the actual output welding current.
5. Current display: Welding Current display when machine is working, Set current display before
welding. Unit
：
A.
6. Voltage display: Welding voltage display when machine is working, Set voltage display when
MIG mode before welding. Unit
：
V.
7. Alarm Led: When the welder is over voltage, less voltage, over current or over heated, the
alarm pilot lamp will be on.
8. The parameter adjust/ select knob.
9. Wave control knob: Controls arc characteristics, Determines the rate at which the amperage
rises when a short circuit is produced.
10. MIG GUN Connect.
11. Output anode
12. Remote Connection Plug
13. Tig Torch Gas Connect