Copyright © Lojer Oy, 2014 | 05/2014
17
3.5.10 Directional or Driving wheel (Option)
Adjustable directional wheel or motorized driving wheel are available as an option on the Lojer Scandia
SC330 operating table. Both wheel work as a directional wheel and make the transporting the table easier.
For safety reasons either one of the wheel do not work with the wireless connection or when
the batteries are charged.
Table top adjustment will not work when directional or drive wheel is activated.
In order to activate the directional wheel press the button on the hand control (Figure 5 (24)). Indicator LEDs
(Figure 5 (6/7)) start to slowly flash, when the directional wheel is activated. The wheel will lower down and
you can move the table back and forth. It is not recommended to move the table side ways when the
directional wheel is activated. The directional wheel will go up to homeposition within 7 s. if not used or by
pressing the button on the hand control (Figure 5 (6)).
Using the motorized driving wheel:
Hang the hand control on the accessory rail on the right side of the head section (the table in
standard configuration) (Figure 2).
Press either one of the Drive-buttons (Figure 5 (24/25)). Double signal can be heard and after a
while the driving wheel lowers down. Indicator LEDs (Figure 5 (6/7)) start to slowly flash, when the
driving wheel is activated.
Press the Drive-buttons (Figure 5 (24/25)) according to the desired direction (Figure 10). Double
signal indicates that the table starts to move. Motion stops, when the button is released. Moving and
stopping happen softly.
The driving wheel will go up to homeposition within 7 s. if not used or by pressing the button on the
hand control (Figure 5 (6)).
In order to alter the speed, please contact Lojer Service.
3.6 Attaching/removing the table top sections
The table top sections of the Lojer Scandia SC330 Operating table are easy to attach with a simple locking
mechanism.
Take a firm grip of the section
Align the pins with the holes
Insert the section by pushing evenly so that the pins engage at the same time
Figure 11: Attaching the table top section
Figure 10: Using the driving wheel
