Copyright © Lojer Oy, 2014 | 05/2014
7
1.3 Controls
The functions of the table are operated with the hand controls or with the foot control which is available as an
option. In order to adjust the table, press the button of the function in question on the control. The movement
stops, when the button is released.
1.3.1 Hand control
The grey hand control is connected to the table with a cable. The connection point is located on the column
under the middle section (Figure 4).
As a standard the auxiliary hand control is grey. The wireless Bluetooth control (blue) is available as an
option. The auxiliary hand control is located in hatch on the main control panel (see Figure 3). It is connected
to the table with a cable.
Make sure that the auxiliary hand control cable doesn’t compress the button, when storing the
control in the hatch.
Both hand controls have the same buttons and symbols (Figure 5). Controls operate in parallel e.g. indicator
LED’s illuminate identically on both controls. However you cannot select functions simultaneously with both
hand controls i.e. you can operate the table only with one hand control at a time.
Figure 5: Hand control
Figure 4: Hand control connector on the column under the middle section
