LOHU 2425PX
User Manual
----------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Voltlaan 408 – 2681 TV Monster – Netherlands
Tel : +31208080743
Email : [email protected]
Website : www.lohuisnetworks.com
International Numbers:
Dubai :
United States:
United Kingdom:
France :
Italy:
Japan:
Argentina:
Brazil :
Pakistan:
+97142280111
+12123812983
+442033557669
+33170612716
+390662207084
+81345506867
+541152391407
+552135219853
+92217019804
-
5
-
3-2 Wireless Security Options
To make wireless networking as safe and easy as possible, this radio provides several
network security features, but requires specific programming and setup.
Security Options
There are several ways you can enhance the security of your wireless network:
Restrict Access Based on MAC address.
You can restrict access to only trusted clients so
that unknown clients cannot wirelessly connect to the radio. MAC address filtering adds an
obstacle against unwanted access to your network, but the data broadcast over the
wireless link is fully exposed.
Use WEP.
Wired Equivalent Privacy (WEP) data encryption provides data security. WEP
Shared Key authentication and WEP data encryption will block all but the most
determined eavesdropper.
Use WPA or WPA-PSK.
Wi-Fi Protected Access (WPA) data encryption provides data
security. A very strong authentication key along with dynamic per frame re-keying of WPA
makes it virtually impossible to compromise.
Enable Wireless Security Separator.
The associated wireless clients will not be able to
communicate with each other if this feature is enabled. The default setting is
disabled
.
3-3 Installing the radio as an AP (Access Point)
Before installing, you should make sure that Ethernet network is working perfectly. You will
be connecting the radio to the Ethernet network so that computers with 10/100 Fast
Ethernet adapters will communicate with other computers on the Ethernet.
1. SET UP THE AP:
Before mounting the radio in a high location, first set up and test the radio to verify wired
network connectivity at ground level or indoors.
a. Prepare a computer with an Ethernet adapter. If this computer is already part of your
network, record its TCP/IP configuration settings.
b. Configure the computer with a static IP address of 192.168.1.x (x cannot be 1) and
255.255.255.0 for the Subnet Mask.
c. Connect a Cat.5 SFTP cable from the radio to the POE.
d. Connect a Cat.5 UTP cable from the POE to computer
e. Turn on your computer, connect the power adapter to the AP and verify the following:
– The power light of the POE goes on.
– The LAN light of the Ethernet port on computer goes on too. (or the LAN status which
showed on the windows linked)
2. To CONFIGURE LAN AND WIRELESS ACCESS
a. Configure the AP Ethernet port for LAN access
• Connect to the AP by opening your browser and entering http://192.168.1.1 in the
address field. A login window like the one shown below opens:
