LOHU 2425PX
User Manual
----------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Voltlaan 408 – 2681 TV Monster – Netherlands
Tel : +31208080743
Email : [email protected]
Website : www.lohuisnetworks.com
International Numbers:
Dubai :
United States:
United Kingdom:
France :
Italy:
Japan:
Argentina:
Brazil :
Pakistan:
+97142280111
+12123812983
+442033557669
+33170612716
+390662207084
+81345506867
+541152391407
+552135219853
+92217019804
-
37
-
A small beam antenna may help (such as a grid or dish antenna). Aligning the
antenna properly will reduce the effects of the interference. This solution won’t help
when the source of interference is extremely close the remote site.
Before checking for interference, ensure all of your hardware is working properly and
your configurations are correct. The path analysis, cabling and antennas should be
checked as well.
9-2 Connection Issues
This section describes several common problems you might have while setting the
radios.
Radio Does Not Boot
When the radio does not boot, use the following steps to check your system:
1. Ensure that the power supply is properly working and correctly connected.
2. Ensure that all cables are workable and connected correctly.
3. Check the power source.
Cannot use the Web Interface
If the radio boots properly, but remains inaccessible via the web interface:
1. Open a command prompt window and enter
ping <ip address unit>
(for example:
ping 192.168.1.1
). If there is no response from the radio, make sure that you the IP
address is correct. If there is response, the Ethernet connection is working properly, do
the next step.
2. Make sure that you are using one of the following Web browsers:
- Microsoft Internet Explorer version 5.0 or later
- Netscape version 5.0 or later.
3. Ensure that you are not using a proxy server for the connection with your Web
browser.
4. Double-check the physical network connections (includes the cables and the
connectors). Use a well-known unit to ensure the network connection is properly
functioning.
9-3 Configuration Issues
The following problems relate to setup and configuration problems:
These are some basic configurations might make the link fail:
RF Channel
SSID
IP address
Rule of MAC address filter
Rule of security settings (such as WEP or WPA)
Rule of authentication (such as settings of radius server and 802.1x)
Configurations of WDS page
