LOHU 2425PX
User Manual
----------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Voltlaan 408 – 2681 TV Monster – Netherlands
Tel : +31208080743
Email : [email protected]
Website : www.lohuisnetworks.com
International Numbers:
Dubai :
United States:
United Kingdom:
France :
Italy:
Japan:
Argentina:
Brazil :
Pakistan:
+97142280111
+12123812983
+442033557669
+33170612716
+390662207084
+81345506867
+541152391407
+552135219853
+92217019804
-
17
-
In this half-duplex mode, the radio can communicate with another wireless bridge and
wireless station. You must enter the MAC address of both adjacent wireless bridges in the
fields provided. WEP should be used to secure all data.
Inter-building
This is the LOHU’s own brand of WDS mode. In this mode, the AP will automatically
connect to another LOHU Radio which is set to inter-building mode, without manually
entering MAC address for each other. This creates a unique link to LOHU radios only.
SSID
The SSID is the unique name shared among all devices in a wireless network. It is case-
sensitive, must not exceed 32 alphanumeric characters, and may be any keyboard
character. Make sure this setting is the same for all devices in your wireless network. The
default SSID name is wireless.
BSSID
A group of Wireless Stations and a single access point, all using the same ID (SSID), form a
Basic Service Set. Using the same SSID is essential. Devices with different SSIDs are unable to
communicate with each other. However, some access points allow connections from wireless
stations which have their SSID set to “any” or whose SSID is blank (null).
Wireless Mode
Only 802.11b/g is available.
Channel
This field identifies which operating frequency will be used. It should not be necessary to
change the wireless channel unless you notice interference problems or setting up the AP
near another access point.
Data Rate
Shows the available transmit data rate of the wireless network. The default is
Best
.
Output Power
Set the transmit signal strength of the radio. The options are full, half, quarter, eighth, and
min. Decrease the transmit power if more than one AP is collocated using the same channel
frequency. The default is
Full
.
Station Mode Flow Control
Uplink Speed Limit (1-1687): It indicates the transmission rate.
