Stopping the UTRED30-16
UTRED30-16 User Guide
44
Stopping the UTRED30-16
Automatically
The UTRED30-16 automatically stops recording temperature when the maximum number
of readings specified during configuration has been reached. Your unit can also be set up to
stop automatically when it is downloaded. This option needs to be set up at the factory
and cannot be changed during configuration with LogTag
®
Analyzer. Your distributor can
supply more information about this option.
Manually
You can configure a UTRED30-16 so it can be stopped with the
START
/CLEAR/STOP
button.
This feature is useful when you take the logger out of a shipment and don’t want to falsify
the statistics with readings taken after the shipment completion. The stop function is
enabled in the
tab during configuration. When enabled, following will
stop the unit:
Press and hold the
START
/CLEAR/STOP
button.
STOPPED
is shown in addition to the
symbol.
Keep holding the button until the
symbol
disappears, then release the button within 2
seconds.
STOPPED
is shown permanently on the display and
the logger will no longer take readings.