20
X
SETUP
DETERMINE THE SHAPE OF THE
FINISHED WORKPIECE
When using the CH3, you must set up the machine before
starting work. This guide is general and describes the
procedure for most setups.
Work is greatly facilitated if you have taken the time before
starting to prepare a drawing of the finished workpiece that
you intend to produce. This also facilitates communication
with Logosol if you need to buy new moulding knives.
SETUP
To ensure good precision of the finished workpiece, it is important to take
care when setting up the machine. Always run a test piece to make sure
that the setup provides satisfactory results. Carefully follow the adjustment
sequence!
IMPORTANT!
