19
LM410
LOG HOUSE MOULDER
OPERATION
Starting the log house moulder:
Make sure that the hatch over the cutter head
is completely closed. Perform the safety check
under
Before starting the machine
in the Safety
Instructions. Set the main switch to ”ON”. Take hold
of the handles on the sides of the control panel,
using both your hands, and press the both black
buttons (hold-to-run controls) with your thumbs.
When starting the machine, press the start
buttons firmly and keep pressing them firmly during
operation. Repeated activations or poorly pressed
start buttons leads to sparking and wear on both
the contactors and the start buttons.
When starting the machine, alternate between
pressing the right button and the left button first.
This way you even out the wear, but it is also a
check that both the buttons work as they should.
Emergency stop:
Release the start buttons.
Stop:
Release the start buttons and set the main switch to
”OFF”.
The cutter head can continue to rotate for up
to 10 seconds after the start buttons have been
released.
