14
ASSEMBLY: WHEEL SUSPENSION & ANTI-TIP GAURDS
Place four wooden blocks (approx. 20x20x20 cm)
under the machine table. Lift the log house moulder
by lowering the table against the blocks until you
can reach and adjust the wheel suspension on the
underside of the machine.
Do not raise the machine to a higher position than
necessary,
Measure the distance between the centres of the
rails. Adjust the wheel suspensions so that you
have the same distance between the wheels on the
opposite sides as between the rails.
Crushing risk.
Make sure that the machine stands firmly before
you start adjusting the wheels.
Install the anti-tip guards
Fit the anti-tip guards to the outsides of the
machine. The anti-tip guards are laterally adjustable.
Adjustments of the anti-tip guards are made on the
inner side of the machine chassis.
