Logosol KS150, Руководство пользователя

Страница: 13 / 20

13
Changing Saw Blade
Break the electric current.
1. Disconnect the plug for the circuit breaker
on the safety edge. Loosen the screws
in the black machine cover a couple of
turns and push the cover backwards 2
cm (0.8”). Lift off the cover.
2. Dismount the fence.
When loosening or tightening the nut that
holds the saw blade, you should fixate the
saw blade by sticking a rod through one of
the openings in it.
3. Dismount the table leaf, which lies over
the saw blade.
Loosen the centre screw in the spindle and
change saw blade.
Never remove the support disc behind
the saw blade, as it can become warped
when it is remounted.
If the tooth width of the new saw blade
deviates from the original one’s width, the
riving knife must be adjusted. Only use
saw blades delivered from Logosol.
Only use saw blades
delivered from Logosol.
The saw blade should
comply with the EU
standard EN 847-1.