Logosol KS150, Руководство пользователя

Страница: 6 / 20

6
Safety Instructions, 2 pages
“ WARNING! “. Pay extra attention
when this symbol appears in the
text.
For your own safety, do not begin
working with the machine before
having read and understood the
entire manual.
Incorrect use of the machine can
cause life-threatening injuries.
Cutting tools: Never place your
hands or tools past the machine’s
table surface while it is running.
Use protective gloves when working
with the Circular Resaw. Risk of
cutting injuries when handling the
saw blade. The saw blade can be
hot immediately after sawing.
Use approved hearing protectors.
Hearing can be impaired after only
a short exposure to high-frequency
sounds. Use approved, well-fitted
eye protectors.
Use protective shoes or boots with
steel toe and deeply patterned sole
with good grip.
Never work in loose-fitting clothing,
an overcoat or the like. Do not
wear a scarf, tie, jewellery or other
items that can get caught in the
equipment.
T h i s s y m b o l m e a n s ” PAY
ATTENTION”, and is always followed
by an admonition or warning with
great importance for safety or
sawing results.
If used incorrectly, the Circular Resaw
can cause serious injury.
The most important safety instructions
are found on this page and the next.
Additional instructions will appear in
each chapter throughout the manual. All
warnings, admonitions, and operating
instructions must be followed to avoid
serious injury.
The Operator:
Only persons who have read and
understood all the instructions in
this manual, who are well-rested, in
good physical health, and have good
eyesight are qualified to use the Circular
Resaw. Persons who do not meet
these requirements are not qualified
operators.
Persons under the age of 18 may not use
the Circular Resaw.
The Work Site:
Sawing with the Circular Resaw should only
be done in good visibility conditions.
Children and animals may not be near
the equipment when the machine is in
operation.
Risk of the work piece being hurled out
of the machine by the saw blade.
Always stand at the side of the machine
during operation.
Be aware that accidents with dangerous
machines happen most frequently when the
operator e.g. is removing sawdust or chips,
or is trying to correct a small disturbance.
Whenever an operational disturbance occurs,
turn the machine off immediately. Such a stop
can seldom be seen on the finished product.